HERMES Q

Otomatik etiketlemede lider Hermes+ yenilendi. Teknolojik gelişmeleri yakından takip eden ve ARGE çalışmalarına büyük yatırımlar yapan Cab, Hermes+’ın yenilenmiş hali HERMES Q’ yu sunar.

1 Operation panel
Operating the device is intuitive and simple with the help of self-explanatory symbols to configure settings.

2 Ribbon holder
Three-part tightening axles enable the ribbon to be replaced quickly and easily.

3 Rugged metal chassis
made of cast aluminum; basis to assemble all units

4 Applicator assembly
They are mounted on hinge pins and can be pivoted in the case of material replacement or maintenance.

5 Plungers
One plunger is fixed on the inner side. A second one is moved that far to the label margin, until a good print image evokes.

6 Print head
All print heads are freely interchangeable at equal width. Easy replacement

7 Automatic ribbon saving (option)The print head is lifted during label feed and the ribbon is stopped.

8 Peel-off plate, pivoted
to improve label transfer onto packaging.

9 Label unwinder
By means of the swing lever and a brake integrated, labels are unwound with constant tension.

10 Liner tape rewinder
After all the labels have been transferred, the liner tape is fully rewound. The three-part tightening axle allows the liner tape to be inserted and removed easily.

Operation panel
Operating the device is intuitive and simple with the help of self-explanatory symbols to configure settings.

1 Nächstes Etikett Button to print the next label

2 Status bar: data reception, record data stream, ribbon pre-warning, SD memory card / USB memory stick plugged in, Bluetooth, WLAN, Ethernet, USB slave, time

3 LED signal: Power ON

4 Printer status: Ready, Pause, number of labels printed in a print job, label in peel-off position, awaiting external start signal

5 USB slot to connect the Service Key or a memory stick, in order to transfer data to the IFFS memory

6 Operation

Depending from the orientation of assembly, display is either in landscape or portrait mode.

HERMES Q Display Landscape

Jump Jump to menue

Examples:

Setup options
Setup options

Print position Y
Print position Y

Abbruch Stop and delete all print jobs

Unterbrechung Interrupt and continue a print job

Print parameters
Print parameters

Print speeds
Print speeds

Wiederholung Reprint the last label

Vorschub Label feed

HERMES Q Display Portrait

Video tutorials

Video tutorials

External operation panel
providing the same functionality as on the printer

Display in landscape or portrait mode

Users are free to choose whether to operate the printer on the external panel or on the one integrated in the device.

Printer connection: USB 2.0 Hi-speed device

External operation panel
1 LED signal: Power ON

2 USB slot to connect the Service Key or a memory stick, in order to transfer data to the IFFS memory

3 Connecting cable USB, lengths 1.8 m, 3 m, 5 m
If length succeeds 3 m, use only specified cables; for dimensions see assembly instructions